Graco Therm-O-Flow 200, Instructions-Parts List Manual, Page: 13 / 109

Component Identification
Screen Screen Screen Components Components Components
1. Screen Order
2. Current date and time
3. Operating Mode
4. Faults, Status
5. MZLP Plug Identifier
6. Zone Setpoint Temperature
7. Zone Actual Temperature
Operating Operating
Operating Mode
Mode
Mode
Description Description
Description
Component Component
Component Status
Status
Status
System Off The system does not have power. • No system status indicator LED on the
ADM
• No heat
• Pump is off
Inactive The heating system and pumps are
disabled. • Yellow system indicator LED on the
ADM
• No heat
• Pump is off
Warm Up The system is heating the material to the
setpoint temperature. • Flashing green system status indicator
LED on the ADM
• Heat is increasing to setpoint
temperature
• Pump is off
Heat Soak Heat zones are all at temperature.
Material is soaking for a user specified
amount of time. • Flashing green system status indicator
LED on the ADM
• Heat is at setpoint
• Material is absorbing more heat
• Pump is off
• Heat soak counter counts down on the
Home screen.
Ready All enabled zones are at setpoint
temperature. The air motor does not have
power. • Flashing green system status indicator
LED on the ADM
• Heat is at setpoint
• Pump is off
Active The system is ready to dispense. • Solid green system status indicator
LED on the ADM
• Heat is at setpoint temperature
• Pump is on
334130D 13