![background image](http://html.mh-extra.com/html/graco/series-e/series-e_operation_2251188025.webp)
Startup
309551C
25
Startup
WARNING
Do not operate Reactor without all covers and shrouds
in place.
1.
Load fluid with feed
pumps
The Reactor is tested with oil at the factory. Flush
out the oil with a compatible solvent before spray-
ing. See page 36.
a.
Check that
b.
Turn on component B agitator, if used.
c.
Turn both PRESSURE RELIEF/SPRAY
valves (SA, SB) to SPRAY.
TI2482A
SA
SB
d.
Open fluid inlet valves (FV).
e.
Start feed pumps.
WARNING
Always provide two grounded waste containers to
keep component A and component B fluids separate.
f.
Hold gun fluid manifold over two
grounded waste containers. Open fluid
valves A and B until clean, air-free fluid
comes from valves. Close valves.
TI2501A
FV
TI2484A