![background image](http://html1.mh-extra.com/html/graco/sdl23-series/sdl23-series_instructions-manual_2253105011.webp)
Installation
3A8626C
11
Installation Mounting Options
Reel Bank Mounting Location’s Selection
A Mounting Adapter Kit is available for installing an XDX
Series Hose Reel in the same location that a Series 500
Hose Reel was previously installed. Graco Kit No.
24A224. See F
A = Original Series 500 holes in mounting surface.
B = Holes on the bottom of the adapter bracket,
pre-drilled to match the Original Series 500 hole
configuration (A).
C = Holes on the top of the adapter bracket, pre-drilled
to match the new XDX Series Hose Reel base.
All Mountings
NOTE: Always use all four (4) large flat washers with
four (4) bolts to mount the hose reel pedestal to any
surface.
NOTE: The reels perform best when the arm allows the
hose to pull straight off of the spool (F
. 6).
F
IG
. 5
A
B
Mounting
Surface
XDX Base
Adapter 24A224
C
To reduce the risk of injury, be sure that the mounting
surface is strong enough to support the reels, weight
of the lubricants, and the stress caused by hard pulls
, page
51, for weights of the hose reel assemblies.
F
IG
. 6
Adapter 24A224
Panel