![background image](http://html1.mh-extra.com/html/graco/reactor-e-30i/reactor-e-30i_repair-parts_2251586085.webp)
Repair
Repair Advanced Display Module
(ADM)
1.
Loosen screw in bracket (402). Lift up on
bracket (402) and remove ADM (27).
2. Disconnect CAN cable (57).
3. Inspect ADM for damage. Replace if necessary.
Figure 41
Repair Engine Control Module
1. Perform
Shutdown, page 49
.
2. Remove two top screws (17) and loosen the two
side screws to lower the back panel (28).
3. Disconnect harness (M) and harness
(F) connectors from the back of the
engine control module (428). See
Engine Control Module Wiring Diagram, page 145
4. Loosen engine control module mounting screws
and remove the engine control module (428).
5. Install new engine control module (428) in air
control panel. Secure clips in place and tighten
mounting screws.
6. Connect all wire harnesses and close the back
panel with two screws (17).
Figure 42
3A1706K
85
All manuals and user guides at all-guides.com
Summary of Contents for Reactor E-30i
