![background image](http://html1.mh-extra.com/html/graco/reactor-2/reactor-2_repair-manual_2251237022.webp)
Error
Error
Error
Location
Location
Location
Type
Type
Type
Description
Description
Description
Cause
Cause
Cause
Solution
Solution
Solution
L1AX
ADM
Low Chemical Level
A
Low material level.
Refill material and update
drum level on ADM
Maintenance screen.
Alarm can be disabled on
the System Setup screen.
L1BX
ADM
Low Chemical Level
B
Low material level.
Refill material and update
drum level on ADM
Maintenance screen.
Alarm can be disabled on
the System Setup screen.
MMUX
USB
Maintenance Due -
USB
USB logs have
reached a level
where data loss
will occur if logs are
not downloaded.
Insert a USB drive into the
ADM and download all logs.
Pressure
difference between
A and B material
is greater than the
defined value.
Ensure material flow is
equally restricted on both
material lines.
Pressure
imbalance is
defined too low.
Ensure that the pressure
imbalance value, on the
System Setup screen, is at
an acceptable maximum
pressure to prevent
unnecessary alarms and
abort dispenses.
Out of material.
Fill tanks with material
Fluid leaking from
heater inlet rupture
disk.
Check if heater
and PRESSURE
RELIEF/SPRAY valve are
plugged. Clear. Replace
rupture disk. Do not replace
with a pipe plug.
P0AX
HCM
Pressure Imbalance
A High
Feed system
defective.
Check feed pump and
hoses for blockage. Check
that feed pumps have
correct air pressure.
22
334946C