Graco Reactor 2, Repair Manual

Page: 54 / 102

Repair
Replace Replace Replace Electric Electric Electric Motor Motor Motor
Remove Remove
Remove
NOTICE NOTICE
NOTICE
To prevent dropping the electric motor, two people
may be required to remove the motor from the
system.
1. Follow Shutdown, page 49 .
2. Open electrical enclosure. Disconnect the
A side heater connector from the TCM. See
Electrical Schematics, page 94 . Close the
electrical enclosure door.
3. Remove mounting bolts from the bottom frame
and move the system away from the wall.
Figure 2
4. Remove upper bolts (3). Tilt the electrical
enclosure down to gain access to the motor
cover.
5. Remove motor and belt covers (123, 131, 132).
Lift cover (132) and loosen the blue bracket (131)
fasteners. Lift the blue bracket (133) off of the
fasteners and set aside. Remove the belt covers
(131, 132).
Figure 3 Motor and Belt Covers
Figure 4 Heater and Belt Covers
54 334946C