Graco Ratio Monark Hydra-Spray Series, Instructions-Parts List Manual

Page: 7 / 24

7 307929
Installation
Installing Fluid Regulation Kit 222564
(Pump Model 231162)
WARNING
Before installing the fluid regulation kit, follow the
Pressure Relief Procedure on page 14. Discon-
nect all hoses from the pump.
Assemble the fluid regulation kit (66) as shown in
Detail A of Fig. 3. (Refer to the parts list on page 19.)
Install the mounting bracket (66k) on the regulator
(66f) using the two screws (66p) and lockwashers
(66q). Connect the fluid regulator and bracket to the
side of the cart (7) using the screw (66l), lockwasher
(66m) and nut (66n). Connect the 22” (560 mm) hose
(66h) to the outlet of the fluid filter (25).
Connect the gun air supply hose (F) between the air
inlet of the gun (E) and the outlet nipple of the gun
(left) air regulator. See Fig. 2.
Connect the fluid hose (D) between the gun fluid inlet
and the outlet nipple (66b) of the fluid regulation kit.
Fig. 3
DETAIL A
66d
66a
66b
7
7
25
66h (REF)
(SEE DETAIL A)
21
22
24
66b
66c
66e 66f
66h 66j
66k
66l
66m 66n
66p 66q
Fluid Regulation Kit 222564
includes items 66a–66q.
26
0973B
1
Connect fluid hose here.
1