Graco PRO 3500WB, Manual

Page: 5 / 48

INSTALLATION
KEY TO TYPICAL INSTALLATION DRAWING
Ref Letter Part No. Description Assembly Included With See Page
A* – Grounded Main Air Supply Line – –
B 206–199 Gun Air Pressure Regulator – 43
C* 235–070 (25’)
235–071 (36’)
235–072 (50’) Gun Grounded Air Supply Hose 223–518 (25’) See
223–519 (36’) front
223–520 (50’) cover
42
D 222–700 Water-base Electrostatic Spray Gun 223–518 (25’) See
223–519 (36’) front
223–520 (50’) cover
37
E – Fluid Supply Air Pressure Regulator SST Pressure Tanks 42
F* 185–918 (25’)
185–919 (36’)
185–920 (50’) Gun Insulated Fluid Supply Hose 223–192 (25’)
223–193 (36’)
223–194 (50’) 40
G 223–640 Air Manifold Assembly 223–477 39
H* – Safety Fence Air Line Interlock 223–640 See page 39 –
J* 110–614 Safety Fence – 42
K* 223–445 or 727–212 Isolation Stand – 41 or 42
L* 223–639 Voltage Control 223–477 39
M – Fluid Supply Unit – 42
N* 208–591 Fluid Supply Unit Non-conductive Air
Supply Hose 223–477 39
P* 185–972 & 185–971 Strain Relief/Ground Terminal 223–192 (25’)
223–193 (36’)
223–194 (50’) 40
Q* – Gun Air Hose Ground Wire 218–663 (25’)
218–664 (36’)
218–665 (50’) 42
R 223–446 Voltage Control Air Hose 223–477 39
S* 223–447 Safety Fence Interlock Air Hose 223–477 39
T 186–119 Safety Fence Warning Sign 223–477 39
U* 210–084 Grounding Rod 223–477 39
V* 110–790 U-Bolts and Plate 223–477 39
W* 223–685 Fence Ground Wire 223–477 39
X* 223–547 Main Ground Wire 223–477 39
Y* 223–548 Voltage Control Ground Wire 223–639 39
A safety fence (J), non-conductive hoses, isolation
stand (K), and voltage control (L) MUST be installed
to isolate the fluid in the fluid line (F), and fluid supply
unit (M) from ground and to prevent people from con-
tacting portions of the system that are charged to
high voltage. This helps reduce the risk of electric
shock, which could cause serious injury.
WARNING
The Typical Installation shown on page 4 is only a guide
for selecting and installing a water-base electrostatic air
spray system. It is not an actual system design. The par-
ticular type and size system for your operation must be
custom designed for your needs. For assistance in
designing a system, contact your Graco representative.
WARNING
Installing and servicing this equipment requires
access to parts which may cause electrostatic shock
or other serious bodily injury if work is not performed
properly. Do not install or service this equipment
unless you are trained and qualified.
Check and follow all local safety and fire codes,
NFPA 33, NEC 504 and 516, and OSHA standard
1910.107.
Warning Signs
Mount warning sign 186–118 (included with the spray
gun) in the spray area where it can easily be seen and
read by all operators. Mount warning sign 186–119
(included with the voltage control) on the safety fence
gate, as designated on the bottom of the sign. Additional
warning signs are available at no charge. See the spray
gun and voltage control PARTS LISTS or the
ACCESSORIES section to order them.