![background image](http://html1.mh-extra.com/html/graco/pm5-238511/pm5-238511_instructions-and-parts-list_2251136010.webp)
10
309377
Setup
Shut-Off Default Amount
The shut-off default amount is for preventing acciden-
tal overfills when dispensing with the trigger locked in
Manual mode. The shut-off default amount is factory
preset at 5 quarts.
In this menu, you can change the shut-off default
amount.
1.
If you have not already entered the dispensing
options menus, do steps 1 and 2 in Selecting
Dispensing Options on page 8.
2.
Press the Auto/Reset button repeatedly until the
clock icon blinks, and the stored shut-off default
amount is displayed to indicate that you are in the
Shut-off Default Amount menu.
3.
With the clock icon blinking and the stored shut-off
default amount displayed, as shown below, do
ONE of the following two options:
D
Enter a new shut-off default amount by press-
ing the 10 button to change the 10s digit,
the 1.0 button to change the 1s digit, and
the 0.1 button the change the first decimal
digit. You cannot enter zero. To lock in the
new shut-off default amount and exit the
dispensing options menus, press the Auto/Re-
set button.
The PM5 beeps and returns to the Manual dispense
mode to indicate that you have exited the dispensing
options menus.
OR
D
Press the Auto/Reset button.
The PM5 beeps and returns to the Manual dispense
mode to indicate that you have exited the dispensing
options menus.
QTS
06044A
! CAUTION
To prevent overfills and spills
Maximum Working Pressure 7 MPa (70 bar, 1000 PSI)
D
Do not obstruct the trigger
D
Do not leave unattended
D
Do not operate below 32
_
F (0
_
C)
D
Read instruction manual