Steering Cable Replacement
36
3A2593C Repair
Steering Cable
Replacement
Removal
1. Loosen four screws and remove pad.
2. Remove six screws and control shroud.
3. Apply parking brake. Raise front wheel off the
ground and support frame on two jack stands.
4. At the handlebar, remove locknut (3) and ball joint
(40) from handlebar. Remove ball joint (40) from
cable (48) and save if not replacing. Loosen two
nuts on cable (48) and remove from bracket.
5. On front wheel fork, remove locknut (3) and ball joint
(40) from fork. Remove ball joint (40) from cable
(48) and save if not replacing. Loosen two nuts on
cable (48) and remove from bracket.
6. Note position of cable (48) and cut off all cable ties
that retain cable to frame. Install new cable as old
cable is removed to follow same route through
frame.
ti19164a
ti19098a
ti18550a
ti19695a
40
48
3
ti19698a
3
40
48
Summary of Contents for LineLazer IV 250SPS
Page 53: ...Notes 3A2593C Repair 53 Notes ...
