![background image](http://html.mh-extra.com/html/graco/linelazer-iv-250sps/linelazer-iv-250sps_repair-manual_2250943034.webp)
Forward/Reverse Cable Replacement
34
3A2593C Repair
Forward/Reverse Cable
Replacement
Removal
1. If equipped with a Pressurized Bead System,
remove pressurized bead tanks and compressor.
See
Pressurized Bead System
manual 332230.
2. Remove tank lid and siphon tube.
3. Remove tank from unit.
4. Use wrench to remove six screws from front shield.
5. Remove front shield from unit.
6. Loosen four screws and remove belt cover.
7. At the handlebar, remove locknut (3) and ball joint
(40) from handlebar forward/reverse lever. Remove
ball joint (40) from cable (148) and save if not
replacing. Loosen two nuts on cable (148) and
remove from bracket.
8. At the ground drive pump, remove locknut (3) and
ball joint (40) from ground drive pump. Remove ball
joint from cable and save if not replacing. Loosen
two nuts on cable (148) and remove from bracket
(62).
9. Install new cable (148) as old cable is removed to
follow same route through frame.
ti24916a
ti24916a
ti19163a
ti19128a
ti19699a
40
3
148
ti19700a
62
40
3
148
Summary of Contents for LineLazer IV 250SPS
Page 53: ...Notes 3A2593C Repair 53 Notes ...