Service
18
310622C
Service
Repairing the Air Valve
Tool Required
•
Torque wrench
•
Torx (T20) screwdriver or 7 mm (9/32”) socket
wrench
•
Needle-nose pliers
•
O-ring pick
•
Lithium base grease
Disassembly
1.
Relieve the pressure.
2.
With a Torx (T20) screwdriver or 7 mm (9/32”)
socket wrench, remove the six screws (3), air valve
cover (2), and gasket (4). See F
IG
. 5.
3.
Move the valve carriage (5) to the center position
and pull it out of the cavity. Using a needle-nose pli-
ers, pull the pilot block (16) straight up and out of the
cavity. See F
IG
. 6.
Air Valve Repair Kit 248916 is available. Refer to
Parts
page 31. Parts included in the kit are
marked with
◆
symbol. Use all the parts in the kit
for the best results.
WARNING
To reduce the risk of serious injury, whenever you are
instructed to relieve pressure, always follow the
Pres-
sure Relief Procedure
on page 13.
F
IG
. 5
2
4
◆
3
ti4682
F
IG
. 6
ti4616
16
◆
5
◆
