Installation
6
3A2960A
System Configuration and Wiring
The System Configuration Diagrams (F
. 6), Sensor Wiring Diagrams (F
. 7 - F
IG
. 8) and Wiring Diagrams
. 9) on the following pages, show typical Injector, Series Progressive and Dual Line lubrication system configura-
tions.
Refer to Table 1, 2 and 3 to determine the Required System Configuration, Sensor Configuration and Wiring Diagram
to use to setup your system.
Table 4 shows additional (optional) setup configurations.
Table 1: System Configurations
Table 2: Sensor Wiring Configurations
Table 3: Modes of Operation
System
Figure
Page
Injector
4
Series Progressive
5
8
Dual Line
6
Sensor
Figure
Page
Dry Contact
7
Source Switch
8
10
Mode
Power
Figure
Page
Time ON/Time OFF
DC
9
Cycle ON or Pressure
ON/Time OFF
DC
9
Low Level Switch
9
