Setup
12
3A2960A
Setup
Entering SETUP MODE
1.
Press both the UP and DOWN ARROW buttons
together for three seconds.
NOTE:
If a button is not pushed for 1 minute, the control-
ler returns to the start of an OFF cycle.
Programming ON Duration
•
on:Pr, on:CY
or
on:ti
appears on
the display identifying the function
you are programming.
•
The LED below the related symbol
on the controller label also indi-
cates the function.
NOTE:
Selection
on:Pr, on:CY
or
on:ti
designates the way the
pump run time is controlled:
•
on:Pr
= Pressure Control,
reaching a specific pressure
threshold measured by an
external pressure switch
•
on:CY
= Cycle Control, com-
pleting a specific number of
cycles of an external
prox/cycle switch
•
on:ti
= Time Control, a spe-
cific duration of time elapses
Pressure Mode (on:Pr) ON Setup
1.
Use the UP or DOWN ARROW to
cycle through the
on:Pr, on:CY
or
on:ti
on the display.
2.
When
on:Pr
displays, press the
ENTER button to lock in the selec-
tion.
3.
Pressure control is an ON / OFF
selection only. Not additional pro-
gramming is required.
Cycle Mode (on:CY) ON Setup
1.
Use the UP or DOWN ARROW to
cycle through the
on:Pr, on:CY
or
on:ti
on the display.
2.
When
on:CY
is displayed, press
ENTER to lock in the selection.
The first number displayed after the
on:CY
is entered, blinks, indicating the device is ready
to program the number of cycles.
3.
Program the cycles by pressing the UP or DOWN
ARROW to move up or down through the numbers
0-9.
4.
When the correct first digit is displayed, press the
ENTER button to lock in the selection
The cursor automatically moves to the second number
field and flashes.
NOTE:
The cycle is a 2-digit number. A leading zero (0)
must be entered in the first field if the number of cycles
is fewer than 10.
5.
Use the UP or DOWN ARROW to scroll through the
numerals 0-9 until the desired number appears in
the second cycle number field.
6.
Press the ENTER button to lock in the selection.
Time Control (on:ti) ON Setup
1.
Use the UP or DOWN ARROW to
cycle through the
on:Pr, on:CY
or
on:ti
on the display.
P: Pressure
C: Cycle
T: Time
