Graco G3-G-12MX-2L0L00-10C00000, Instruction Manual

Page: 31 / 40

Max Model Setup
332305G 31
3. The cursor is automatically
positioned to enter the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move up
and down through the numbers 0-9 until the first
number in the PIN code is displayed in the field.
4. Press the ENTER button to set the num-
ber. The cursor automatically moves to
the next number field.
5. Repeat steps 3 and 4 for each PIN Code prompt
field.
If the PIN Code you entered is correct, the first editable
character on the display will flash.
NOTE: A blinking field on the display indicates the G3 is
in SETUP MODE. In RUN MODE numbers on the dis-
play will not blink.
Setting the Real Time Clock
DMS
™
Equipped Models Only
NOTE: Set the real time clock prior to plugging the USB
flash drive into the pump.
Enter the Year:
• The year displays.
The first programma-
ble character, the
decade, blinks indi-
cating the device is
ready to program the
decade digit of the year.
• The LED under the # sign lights while setting the
year.
1. Use the UP and DOWN arrow but-
tons to move up and down through
the number 0-9 until the number
for the current decade is displayed
in the field.
2. Press the ENTER button to set the
decade number. The cursor auto-
matically moves to the next field, the
year number.
3. Use the UP and DOWN arrow but-
tons to move up and down through
the number 0-9 until the number
for the current year is displayed in
the field.
4. Press the ENTER button to set the
year number.
The 3-character month displays indicating the G3 is
now ready to program the month.
Enter the Month:
1. Set the 3 character month by using
the UP and DOWN ARROW but-
tons to move up and down through
the list of months until the current
month is displayed in the field.
2. Press the ENTER button to set the
month.
The 2-digit date displays indicating the G3 is now
ready to program the date.
Enter the 2-digit Date:
The first programmable
character of the 2-digit
date blinks indicating the
device is ready to pro-
gram the first digit of the
date.
The LED under the # sign lights while setting the date.
1. Use the UP and DOWN ARROW
buttons to move up and down
through the numbers 0-3 until the
first digit of the date is displayed in
the field.
2. Press the ENTER button to accept
the selection. The cursor automati-
cally moves to the second digit of
the date.