Installation
General Information
• The Typical Installation shown on p. 8 is only
a guide for installing system components and
accessories. It is not an actual system design.
Contact your Graco distributor for assistance in
designing a system to suit your particular needs.
• Always use Genuine Graco Parts and Accessories,
available from your Graco distributor. If you supply
your own accessories, be sure they are adequately
sized and pressure-rated for your system.
• Reference numbers and letters in parentheses
refer to the reference numbers in the figures and
in the Parts Lists.
Instructions Before First Use
Before using the pump:
1. Check that all fluid cover and fluid
manifold fasteners are tight. Follow the
.
2. Install muffler (AB).
Mount the Pump
1. For ease of operation and service, mount the
pump so the air inlet (T), fluid inlet (N), and fluid
outlet (M) ports are easily accessible.
NOTE: The arrow labels on the pump show fluid
inlet and outlet directions.
2. Mount the pump in a well-ventilated area with
sufficient clearance on all sides for operator
access and servicing.
3. The air inlet (T) must be on the opposite side of
the pump from the muffler (AB).
4. The pump can be mounted in any orientation.
The fluid manifolds can be rotated to face either
direction.
NOTE: Stand Kit 17H315 is available as a
mounting option.
5. Be sure the mounting can support the weight of
the pump, hoses, and accessories as well as the
stress caused during operation. The pump has
four mounting holes (V) for M10 (3/8 in.) bolts.
See
Triton Users Note: The mounting hole pattern is
the same.
KEY
N
Fluid Inlet
4D150: 1 in. tri-clamp flange, 1/2 in. npt,
or 1/2 in. bspp
4D350: 1 in. tri-clamp flange, 3/4 in. npt, or
3/4 in. bspp
M
Fluid Outlet
4D150: 1 in. tri-clamp flange, 1/2 in. npt, or
1/2 in. bspp
4D350: 1 in. tri-clamp flange, 3/4 in. npt, or
3/4 in. bspp
T
Compressed Air Connection; 1/2 npt
4D150: 1/4 in. npt
4D350: 1/2 in. npt
V
Mounting holes for M10 (3/8 in.) bolts
(4 required)
AB
Muffler
6
333015E
Summary of Contents for Endura-Flo 4D150
Page 9: ...Installation Notes 333015E 9...
Page 30: ...Parts Parts 30 333015E...
