Torque Instructions
If fluid cover or manifold fasteners have been
loosened, it is important to torque them using the
following procedure to improve sealing.
NOTE: Always completely torque the fluid covers
before torquing the manifolds.
1. Tighten all fluid cover screws in the specified
crisscross pattern. Repeat the pattern to tighten
to the specified torque.
4D150 Models: 20–25 ft-lb (27–34 N∙m)
4D350 Models: 28–33 ft-lb (38–45 N∙m)
2. Repeat for fluid manifolds. Torque to:
4D150 Models: 20–25 ft-lb (27–34 N∙m)
4D350 Models: 28–33 ft-lb (38–45 N∙m)
3. Retorque the air valve and air valve manifold
fasteners in a crisscross pattern to 100–120 in-lb
(11–14 N∙m).
4. Retorque the pilot valves to 100–120 in-lb
(11–14 N∙m).
Torque Sequence
Fluid Cover Screws
4D150 Models
4D350 Models
Manifold Fasteners
Air Valve and Air Valve Manifold Fasteners
333015E
29
Summary of Contents for Endura-Flo 4D150
Page 9: ...Installation Notes 333015E 9...
Page 30: ...Parts Parts 30 333015E...
