![background image](http://html1.mh-extra.com/html/graco/e-flo-em0011/e-flo-em0011_instructions-and-installation-manual_2251329013.webp)
Operation
Operation
Operation
Operation
Startup
Startup
Startup
1.
Unlock the fused safety switch (B) and turn it on.
See
Connect the Power Supply, page 11
.
2.
Press the start pushbutton (C).
3.
Check that the power indicator (L) is lit (steady
on).
4.
See
Advanced Motor Operation, page 13
or
Basic Motor Operation, page 14
for further
instructions.
Figure 9 Power Indicator
Shutdown
Shutdown
Shutdown
Follow the
Pressure Relief Procedure, page 13
.
Pressure
Pressure
Pressure Relief
Relief
Relief Procedure
Procedure
Procedure
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from splashing fluid and moving parts, follow the
Pressure Relief Procedure when you stop spraying
and before cleaning, checking, or servicing the
equipment.
1.
Disengage the start/stop control (C). See
Connect the Power Supply, page 11
.
2.
Shut off and lock out the fused safety switch (B).
3.
Relieve all fluid pressure as explained in your
separate E-Flo DC pump manual.
Advanced
Advanced
Advanced Motor
Motor
Motor Operation
Operation
Operation
The Advanced E-Flo DC motors require installation of
the 24P822 Control Module Accessory Kit to provide
the interface for users to enter selections and view
information related to setup and operation. See the
Control Module Accessory Kit manual 3A2527 for
installation and operation information.
NOTICE
NOTICE
NOTICE
To prevent damage to the softkey buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Figure 10 Control Module Accessory
3A2526L
13
All manuals and user guides at all-guides.com