Graco Accu-Shot 233807 Instructions And Parts Download

Page: 1 / 16

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

For high-pressure grease dispense.

5000 psi (34.5 MPa, 345 bar) Maximum Working Pressure

Part No. 233807

English - measures in ounces and pounds

Part No. 233933

Metric - measures in grams and kilograms

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

CAUTION

This valve is designed to dispense lubricat-
ing grease only. Do not dispense other fluids
with this dispense valve.

This dispense valve is designed for use
within its limits. See “Technical Specifica-
tions” on page 14.

This dispense valve is not designed for
in-line installation. Do not install with a
shut-off valve on the outlet side of the meter.
Such installation could result in damage to
the meter housing cover.

Model 233807 Shown

309454C

Instructions and Parts

Accu-Shot

™

Electronic

Grease Meter

Summary of Contents for Accu-Shot 233807

















Search results

Summary of Contents for Accu-Shot 233807

Reviews:

Related manuals for Accu-Shot 233807

Brands by name

Popular brands

Graco Accu-Shot 233807, Instructions And Parts

Search results

Summary of Contents for Accu-Shot 233807

Reviews:

Related manuals for Accu-Shot 233807

Brands by name

Popular brands