background image

Graco Warranty

Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship 
on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by 
Graco, Graco will, for a period of twelve months or two thousand hours of operation from the date of sale, repair or replace any part 
of the equipment determined by Graco to be defective. However, any deficiency in the barrel, handle, trigger, hook, internal power 
supply, and alternator (excluding turbine bearings) will be repaired or replaced for thirty-six months or six thousand hours of 
operation from the date of sale. This warranty applies only when the equipment is installed, operated and maintained in 
accordance with Graco's written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused 
by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, 
or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the 
incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper 
design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by 
Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor 
for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. 
The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose 
any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, 
labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT 
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. 

Graco's sole obligation and buyer's sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no 
other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or 
property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within 
two (2) years of the date of sale.

Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection 
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not 
manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer.  
Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying 
equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach 
of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The parties acknowledge that they have required that the present document, as well as all documents, notices and legal 
proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les 
parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et 
procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les  
procedures concernées.

Graco Phone Numbers

TO PLACE AN ORDER, 

contact your Graco distributor, or call this number to identify the distributor closest to you: 

1-800-533-9655 Toll Free

612-623-6928

612-378-3590 Fax

All written and visual data contained in this document reflects the latest product information available at the time of publication. 

Graco reserves the right to make changes at any time without notice.

MM 309454

Graco Headquarters:

 Minneapolis

International Offices:

 Belgium, Korea, China, Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

www.graco.com

Printed in USA  309454C 7/05

Summary of Contents for Accu-Shot 233807

















Reviews: