Graco 25U546, Manual

Page: 20 / 48

How to Spray
20 3A9031A
4. For Curb Position, place gun at 45°
angle.
5. For Gun Arc Spray Position, place gun
at rear of striper. Rear position improves
arc quality.
NOTE: Verify that the gun can still be
triggered and that the trigger lock can still be
engaged after installation. Make
adjustments if necessary.
NOTE: When first removing from storage or
switching paints/colors, consult Cleaning
and Flushing Fluid Compatibility , page 28.
Paint Stripe Width
1. Adjust gun up or down to change paint
stripe width. If desired width cannot be
attained, change tip. Refer to
Component Identification , page 8 for
proper tip for application.
Spray Test Stripe
1. Disengage trigger lock.
2. Trigger gun and spray test pattern.
Slowly adjust pressure to eliminate
heavy edges. Use smaller tip size if
pressure adjustment can not eliminate
heavy edges.
ti30098a
ti30304a
ti30078a
ti30103a