Service
308798ZAA
7
2. Install ball (206) in piston rod. If thread sealant is
applied to piston valve threads, make sure that none
gets on ball.
3. Tighten piston valve to piston rod as specified:
4. Soak all leather packings in SAE 30W oil for 1 hour
minimum prior to assembly. Place male gland (204)
in cylinder. Alternately stack UHMWPE (203) and
leather packings (223) (note orientation). Place
female gland (224) in top of cylinder. Seat packings.
5. Install seal (201) into packing nut (202). Install
throat adjustment spacer onto packing nut. Loosely
install packing nut into cylinder.
6. Grease piston packings.
7. Slide piston assembly into bottom of sleeve. Assure
u-cup is not rolled over or damaged.
Models
Torque
239923
27 +/-3 ft-lb.
240291, 240800
55 +/-3 ft-lb.
240917
55 +/-5 ft-lb.
ti7575a
206
ti7576a
ti7573f
203
224
223
204
Not used on
239923,
243344 &
243345
223
203
NOTICE
Do not slide piston assembly into top of sleeve as this
may damage piston packing.
ti7581a
201
202
228
ti7578c
ti7577a
Summary of Contents for 239923
Page 9: ...Notes 308798ZAA 9 Notes ...