3
308655
HAZARDOUS FLUIDS
Improper handling of hazardous fluids or inhaling toxic fumes can cause extremely serious injury,
even death, due to splashing in the eyes, ingestion, or bodily contamination.
D
Know the specific hazards of the fluid you are using.
D
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state, and national guidelines.
D
Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid
and solvent manufacturer.
INJECTION HAZARD
Fluid from the dispensing valve, leaks, or ruptured components can inject fluid into your body and
cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on
the skin can also cause serious injury.
D
Fluid injected into the skin may look like just a cut, but it is a serious injury.
Get immediate
surgical treatment.
D
Do not point the dispensing valve at anyone or at any part of the body.
D
Do not put your hand or fingers over the end of the dispensing valve.
D
Do not stop or deflect leaks with your hand, body, glove or rag.
D
Use only extensions and no-drip tips that are designed for use with your dispensing valve.
D
Tighten all fluid connections before you operate this equipment.
D
Check the hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. Do
not repair high pressure couplings; you must replace the entire hose.
WARNING
WARNING
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
D
Keep clear of all moving parts when you start or operate the pump.
D
Before you service this equipment, follow the
Pressure Relief Procedure
on page 7 to prevent
the equipment from starting unexpectedly.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D
Ground the equipment. Refer to
Grounding
on page 6.
D
If there is any static sparking or you feel an electric shock while you use this equipment,
stop
dispensing immediately.
Do not use the equipment until you identify and correct the problem.
D
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being dispensed.
D
Do not smoke in the dispensing area.
