Service
10
333028E
4. Push out pin (29).
5. Disassemble intake valve. Clean and inspect.
O-ring (227) may require a pick for removal.
NOTE:
Spring (233) only used on 16Y601, 16X423, and
16X425.
6. Remove piston rod and sleeve.
7. Invert piston rod and sleeve and pound on hard sur-
face until piston rod comes out of sleeve.
Mark IV and Mark VII models:
Remove sleeve
spacer from sleeve.
8. Remove packing nut (202).
9. Invert piston rod and insert into cylinder to force out
throat packings.
29
26
ti4258b
233
215
214
212
213
227
ti23115a
ti7746a
ti7572a
202
ti7726a
ti4258e
Summary of Contents for 16X423
Page 19: ...Notes 333028E 19 Notes ...