Bottom View
6-2 Loosen the (4) M6 Connector Bolts for the
Back Track Assembly.
M6 Connector
Bolt
6-3 Slowly move the Carriage from one end of the
Track to the other, tightening each of the (4) M6
Connector Bolts as you go.
6-1 Place the Carriage onto the Track.
Note: Make sure the Channel Lock is in the open
position.
6-4 To adjust the carriage wheels, loosen the (2)
M6 Connector Bolts and adjust the Carriage to fit
to the track. Roll the carriage from side to side as
you tighten each M6 Connector Bolt. Make sure
the carriage rolls smoothly.
M6 Connector
Bolt
Step 6 - Carriage Installation
Assembly
Tools Needed:
4mm Allen Wrench
8
Summary of Contents for Q-Zone Hoop-Frame PRO
Page 27: ...22 Notes ...
