3-3 Press the Right and Left Legs tight against the
Table Assembly and tighten the (16) M6 x 10mm
Connector Bolts.
Note:
Make sure that the Table Assembly is flush
with the top of both Right and Left Legs.
3-1 Install the Table Assembly to the Right Leg
using (4) M6 x 10mm Connector Bolts by angling
the Table Assembly toward the ground.
Note: Leave bolts loose so that you may align the
adjoining parts.
3-2 Install the Table Assembly to the Left Leg
using (4) M6 x 10mm Connector Bolts by resting
the Table Assembly on the Brace Tabs.
Note: Leave bolts loose so that you may align the
adjoining parts.
Table Assembly (1)
M6 x 10mm
Connector Bolt (8)
Step 3 – Frame Cross Support Installation
Parts Needed:
Tools Needed:
4mm Allen Wrench
M6 x 10mm
Connector Bolt
Table Assembly
Table Assembly
M6 x 10mm
Connector Bolt
M6 x 10mm
Connector Bolt
Assembly
5
Summary of Contents for Q-Zone Hoop-Frame PRO
Page 27: ...22 Notes ...
