Tools Needed:
Tools Needed:
Flat Head Screwdriver
5mm Allen Wrench
4mm Allen Wrench
1. Attach your Needle Plate using (4) Needle Plate
Screws, don’t tighten the screws during this
step.
2. Rotate Hand Wheel until the Needle is in the
lowest position. Move the Needle Plate until it
is centered around the Needle and tighten all
(4) Needle Plate Screws.
1. Using the 4mm Allen Wrench, remove the (4)
Screws from the Handle Plate. Remove the
Handle Plate and the Handle Bars
Needle
Plate
Needle Plate
Screws (4)
Needle in
Lowest
Position
Set
Screw
Handle
Plate
6
1. Adjust the Handles up and down by tightening
and loosening the Set Screw on the back of the
Handle Plate using the 5mm Allen Wrench.
Handle
Plate
Handle
Bars
Handle
Bars
M6 x 16mm
Socket FCHS (4)
|
Needle Plate
Q’nique 21: Service Manual
Handle Bars
To Remove:
To Adjust:
Summary of Contents for Q'nique 21
Page 1: ...Service Manual 21 ...
