Tools Needed:
3. If thread winds mostly on the bottom of the
bobbin, the Tension Disc Post will need to be
heightened by twisting it counter clockwise and
retightening the hex nut.
2. If thread winds mostly on the top of the
bobbin, the Tension Disc Post will need to be
heightened by twisting the Tension Disc Post
clockwise and retightening the hex nut.
1. Adjust the Bobbin Winder Cam to be centered to the Bobbin without touching it by loosening the
Set Screw with the 1.5 mm Allen Wrench, adjusting the Cam, and retightening the Set Screw. If
thread winds mostly on the top of the bobbin, the Tension Discs Post will need to be lowered by
twisting the Tension Disc Post clockwise and retightening the hex nut.
9mm Crescent Wrench
1.5mm Allen Wrench
Set
Screw
Tension
Disc Post
|
Bobbin Winder
Q’nique 21: Service Manual
1
Summary of Contents for Q'nique 21
Page 1: ...Service Manual 21 ...
