66
19X Service Manual
Replacing the Hook Holder (continued)
Installation Instructions
1.
Turn off the machine.
2. Rotate the
hand wheel
to raise the needle
to the highest point.
3.
Remove the needle plate using the fl at-head
screwdriver (see page 59).
4. Remove the bobbin case from the hook
assembly.
5. Turn the inside part of the
hook assembly
(shown in blue) so that the
positioning
guide
is at the highest point.
6.
Slide the fi nger of the
hook holder
into
the middle of the
hook assembly’s
positioning guide
.
Attach loosely with the
hook holder screw
.
Do not tighten.
Hook Assembly
Positioning Guide
Hook Holder
1
4
2
3
5
6
7
Hand
Wheel
