GPS1195 Auto Gate Manual Version 3
14)
The GPS1195 when sold with a round aluminum arm, you will find an aluminum spacer
attached to the outside of the main shaft. After removing the hardware attached, re-attach the
spacer lining up the 3 holes with the main shaft holes by using a piece of tape to keep the
spacer in place. Then slide the aluminum arm over the main shaft and connect the 3 bolts
supplied through the arm into the spacer and then the main shaft. Never mount the spacer on
the outside of the arm as you will damage the paint finish and the arm will become loose over a
short time frame.
15)
If there are any additional items to add to the barrier arm, please check with the
Manufacturer on the proper mounting location in order for the barrier gate to smoothly lift the
arm up & down.
16)
To Avoid Entrapment:
When the Barrier arm is in the closed position, there shall be a
minimum 2ft clearance (610MM) from any Rigid Object
Page 4B
Summary of Contents for GPS1195
Page 28: ......
