6
III. Charge the Battery
Please use up the battery and discharge it for 2-3 times and then charge the battery for at
least 12 hours for initial use, in order to keep the quality of the battery.
The normal charging time of this product is 4-5 hours.
Put the battery into the inside of the terminal and connect the charger to 100V/220V AC
power supply to charge the battery. Then the power indicator on the upper right corner of the
terminal screen will keep strolling as showed in picture 3-1:
( picture 3-1 )
When the battery is fully charged, the power indicator will stop strolling; if the battery is
charged on switch-off mode, the following picture 3-2 indicates the charging is finished:
( picture 3-2 )
Notes:
Please always use the charger offered by the supplier. Dangers damages of the
product caused by usage of any unconfirmed charger will not be compensated
and repaired.
The battery should be charged in time when the terminal automatic shutdown or
being alarmed with low power.
The standby duration and call duration offered by the supplier is calculated in
perfect functional mode, in practice, working hours of the battery may vary due
to difference of internet service, functional mode and usage mode.
Disconnect the terminal and charger as soon as possible after the battery is well
charged.
