9
information of the ward attached with local map through this website message.
(2) Get Location by Web server of Platform
Step 1: Log onto the platform (Please contact with the service provider to get the
platform address).
Step 2: Click the terminal of the ward, then the location of the ward will be
displayed on the map.
2. Setup of Centre Number (point to server (P2S))
Set the centre number by SMS through the mobile phone, after the setup is
successful, then the mobile phone that sending the SMS will receive the
“&710&successful setting&&”
response message from the terminal.
Command format: #710# center number # user password ##
For example:
#710#134xxxxxxxx#0000##
Note: All alarming information thereafter including SOS, low power,
electronic fence, etc will be returned to that number.
3. Bi-directional Call Function
Incoming calls can be rejected by pressing upper left button or received by
pressing middle right button.
Send the command in form of SMS to the terminal via mobile phone. After
the setup is successful, the mobile phone will receive the
“&710&successful setting&&” response message from the terminal.
Setup format: #711# Call1# Call2 # Call3 # 0000##
