GPO Display NSV series, User Manual

Page: 42 / 46

NSV-Series
Video wall
www.gpodisplay.com NSV-series Video wall
♦ Vertical Edge Adjust (VEG)
- ID1 ~ ID3 : Set ID (“001” ~ “100”)
- DA1 ~ DA3 : “000” ~ “200”
Ex) <STX>001VEGW0400<ETX> ( V-Edge Adjust 40 )
Acknowledgement => <STX>001VEG#040#<ETX>
♦ HDMI Input format (IVF)
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f
I V F
W 0 0x0d
Hex ASCII (capital letter) Hex
- ID1 ~ ID3 : Set ID (“001” ~ “100”)
-DA1 ~ DA3 : “R44” : RGB444
“Y44” : YPbPr444
“Y22” : YPbPr422
Ex) <STX>001IVFWR440<ETX> ( HDMI Input format RGB444 )
Acknowledgement => <STX>001IVF#R44#<ETX>
♦ Color Adjust DVI (FCD)
- ID1 ~ ID3 : Set ID (“001” ~ “100”)
- DA1 ~ DA3 : “000” ~ “255” ( Color Value )
- R/W : “W” (Write)
“R” (Read)
-IND : “0” ( Sub-Brightness)
“1” ( R-Offset )
“2” ( G-Offset )
“3” ( B-Offset )
“4” (Sub-Contrast )
“5” ( R-Gain )
“6” ( G-Gain )
“7” ( B-Gain )
Ex) <STX>001FCDW1004<ETX> ( Write : DVI Sub-Contrast 100 )
Acknowledgement => <STX>001FCD#1004<ETX>
Ex) <STX>001FCDR0002<ETX> ( Read : DVI G-Offset )
Acknowledgement => <STX>001FCD#1102<ETX> ( G-Offset:110 )
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f V E G W 0 0x0d
Hex ASCII (capital letter) Hex
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f F C D 0x0d
Hex ASCII (capital letter) Hex
42