GPO Display NSV series, User Manual

Page: 12 / 46

NSV-Series
Video wall
www.gpodisplay.com NSV-series Video wall

Connections
DVI and HDMI distributor instructions
In the event that a DVI or HDMI signal distributor/distribution amplifier
does not support EDID, first connect the cables to the input of the master
set (monitor) and then connect the cable from the output of the master
(monitor) to the distributor/splitter to the input of the slave set (Monitors)
as shown below:
12
• For use HDMI signal, use an HDMI-to-DVI cable between HDMI signal source and master set.
*Input
Output
Input
Input
Distribution Amplifier
PC
Input Max Timing Daisy Chain
DVI 1920 X 1080 3 Displays
VGA 1920 X 1080
3 Displays
RS-232 N/A 12 Displays
Connected
Sets
DVI VGA RS-232
1~4
0 0
0
5~9
1 1 0
10~17
2 2 1
18~25
3
3
2
26~33
4 4 3
•Daisy Chain Connection Limit
•Input Signal Distributor requirement
(assumes use of a 1in/4out signal distributor):
• Image quality cannot be guaranteed when daisy chain connection limit is exceeded.
*Note: “Input” and “Output” refers to whether the
cable is connected to the display’s input or output