GPO Display NSV series, User Manual

Page: 38 / 46

NSV-Series
Video wall
www.gpodisplay.com NSV-series Video wall
8. How to choose display ID number
♦
Read Set ID Number
* Attention : “Read Set ID” Function requires serial connection to only one display (1 pc : 1 display)
- ID1 ~ ID3 : “FFF” ( Set ID )
- DA1 ~ DA3 : “000” ( Don’t care )
Ex) <STX>FFFSIDR0000<ETX> ( Read Set ID )
Acknowledgement => <STX>001SID#001#<ETX> ( Set ID : 1 )
♦ Write Set ID Number
* Attention : Write Set ID Function requires serial connection to only one display (1 pc : 1 display)
- ID1 ~ ID3 : “FFF” ( Set ID )
- DA1 ~ DA3 : “001” ( Set ID Number )
Ex) <STX>FFFSIDW0010<ETX> ( Write Set ID : 1 )
Acknowledgement => <STX>001SID#001#<ETX>
9. Command List
♦ Power On/Off (PWR)
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f F F F S I D R 0 0 0 0 0x0d
Hex ASCII (capital letter) Hex
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f F F F S I D
W
0 0x0d
Hex ASCII (capital letter) Hex
STX ID1 ID2 ID3 CM1 CM2 CM3 R/W DA1 DA2 DA3 IND ETX
0x0f P W R W 0 0x0d
Hex ASCII (capital letter) Hex
-ID1 ~ ID3 : Set ID (“001” ~ “100”)
-DA1 ~ DA3 : “-ON” : Power On / “OFF” : Power Off
Ex) <STX>001PWRWOFF0<ETX> ( Power Off )
Acknowledgement => <STX>001PWR#OFF#<ETX>
Note: Do not substitute “R” for “W” in the
“R/W” column in order to read display
power state..
38