GPO Display NSV series, User Manual

Page: 31 / 46

NSV-Series
Video wall
www.gpodisplay.com NSV-series Video wall
2) Virtual Remocon (Remote Controller)
- Select the “Remocon” Tab as shown to the left.
- This virtual remote controller controls sets (displays)
via RS-232 in the same manner that a physical remote
controller would.
Note: Functions in Slide Tab will be described
in “6. Slide Function”
3) Color Setting
- Users may access the “Color Setting” mode only after
entering Supervisor Mode. In order to enter
Supervisor mode, go to “Control Mode” in the toolbar
(top) and select “Setting Mode”
- Hot key: Ctrl+F2.
- Click “OK”
- Adjust color values (0~255). The color will be
optimized during production & Quality Assurance.
Adjusting color values is not recommended without
prior consultation with GPO US.
31