PCD Pump User Guide
Installation
2/20/19
GPD Global
®
7
2. Prepare the PCD Table Stand to hold a pump:
a. With one hand, support the extension arm (Item A) while loosening the clamp handle
(Item B) with the other hand.
b. As needed, slide and rotate the extension arm vertically and laterally to establish
desired position and orientation.
c. To lock the extension arm in place, tighten the clamp handle.
d. Using a 4 mm Allen key, loosen the bracket screw (Item C).
3. Mount a pump in the PCD Table Stand:
a. Disconnect the pump cable from the pump controller.
b. Feed the pump cable (Item D) through the bracket
(Item E).
c. Then position the pump in the bracket so the central
barrel (black section) of the pump is positioned in the
bracket as shown above.
d. Tighten the bracket screw (Item C).
(A) Extension arm
(B) Clamp handle
(C) Bracket screw
(D) Cable
(E) Bracket
