VCR Setup (Continued)
The VCR Setup Menu
11
Press VCR, then press SETUP/MENU to display
the MAIN menu.
22
Press
3
3
or
4
4
to select the VCR SETUP menu,
then press ENTER.
The VCR SETUP menu will appear.
33
Press
3
3
or
4
4
to choose a desired item on the
VCR SETUP menu. Then press
1
1
or
2
2
to choose
a desired setting.
SCREEN DISPLAY
The on-screen display of this VCR can be turned on or off.
The SCREEN DISPLAY is switched between ON and OFF
by pressing
1
1
or
2
2
.
LANGUAGE
The on-screen programming of this VCR can display in either
English, Spanish, or French.
The LANGUAGE is switched among ENGLISH, SPANISH
and FRENCH by pressing
1
1
or
2
2
.
AUDIO MODE
The VCR has two separate audio playback systems, the high
quality VHS Hi-Fi system and standard NORMAL mono sys-
tem. The same audio is generally recorded on both systems.
The VHS Hi-Fi system plays on separate (left and right) chan-
nels, and the NORMAL system plays monaural sound. The
normal track is always played so the cassette can be played
on a VCR that does not have VHS Hi-Fi.
The AUDIO MODE is switched between HI-FI and NORMAL
by pressing
1
1
or
2
2
.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
VCR automatically selects the corresponding receiving mode
(Stereo or SAP) regardless of the selected position. For normal
operation, the display should be in the STEREO position. The
VCR will then record a STEREO program when available, and
record a mono program IF the program is NOT IN STEREO.
For weak STEREO and/or SAP broadcasting, changing the
display to mono may give clearer sound.
The BROADCAST TYPE is switched among STEREO, SAP,
and MONO by pressing
1
1
or
2
2
.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/ NORMAL)
is in HI-FI position] for selecting the audio output signals from
the AUDIO OUT terminals (L ch and R ch), and stereo.
This display setting should normally be in the stereo position,
so that when a stereo tape is played, the stereo sound will be
heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
The AUDIO OUTPUT is switched among STEREO, LEFT, and
RIGHT by pressing
1
1
or
2
2
.
Channel Selection
This VCR is equipped with a frequency synthesized
tuner capable of receiving up to 181 channels. These
include VHF channels 2-13, UHF channels 14-69 and
CATV channels 1-125.
Preparation:
Connect the VCR to the desired type of antenna or cable TV
system, as shown in Connecting Antenna/Cable TV to
DVD+VCR on page 12.
AUTO CHANNEL PROGRAMMING
11
Press SETUP/MENU and the MAIN menu will
appear.
22
Press
3
3
or
4
4
to select the CHANNEL SETUP
menu, then press ENTER.
The CHANNEL SETUP menu will appear.
33
Press
4
4
to choose the INPUT SOURCE item,
then press
1
1
or
2
2
to select TUNER.
Press
1
1
or
2
2
repeatedly to switch among TUNER, LINE1
and LINE2.
44
Press
3
3
or
4
4
to choose the AUTO CHANNEL SEARCH
item, then press
1
1
or
2
2
to set the channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
55
After the AUTO CHANNEL SEARCH is complete,
make sure the CHANNEL SOURCE is set appro-
priately (TV or CATV) by pressing
3
3
or
4
4
and
choosing the correct CHANNEL SOURCE (TV or
CATV) by pressing
1
1
or
2
2
using the CHANNEL
SETUP menu.
Remember, TV is for off the air antenna reception,
CATV is for cable TV connection.
66
Press SETUP/MENU to return to the TV screen.
77
Use CH(
▲
/
▼
) or CH (
▲
/
▼
) on the front panel to
cycle the VCR through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from
memory manually.
1
Press
4
4
to choose the ADD/DEL CH item on the
CHANNEL SETUP menu. Press
1
1
or
2
2
to select a
channel to add or erase.
2
Press
ENTER
to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3
Press
SETUP/MENU
to return to the TV screen.
16
SELECT
TO EXIT PRESS
ENTER
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT
TO EXIT PRESS
ADJUST
SCREEN DISPLAY:
ON
LANGUAGE:
AUDIO MODE:
BROADCAST TYPE:
AUDIO OUTPUT:
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT
TO EXIT PRESS
ENTER
AUTO CHANNEL SEARCH
CHANNEL SOURCE:
ADD/DEL CH:
INPUT SELECT:
Summary of Contents for Sonic Blue DVR4250
Page 1: ......
