18
2. Remove any stickers and foils and ensure that no debris (e.g. packaging material) plugs the
funnel tube or grinding mechanism.
3. There may be some production residue stuck to the device. Clean it before
fi
rst use and
after prolonged storage. Wipe out the inside of the funnel tube (3) with a clean, wet cloth.
Rinse out the coffee compartment and the lid with warm water and a small amount of de-
tergent. Then dry all parts thoroughly. Follow the instructions in the chapter “Cleaning”.
Use
ATTENTION!
❐
Risk of injury! Never reach into the funnel tube or grinding mechanism when the device is
connected to the power supply and keep your hair and clothing away from it!
❐
Never use hard or sharp-edged objects when you work with the device (e.g. knives, forks).
❐
Some of the coffee beans may jump out of the funnel tube during the grinding process. For
this reason, always use the device with the funnel lid (1) closed and do not open it during
operation. This way, you also preserve the aroma.
❐
Always turn off the device before you remove the funnel lid or the coffee compartment (7).
❐
Always shut off the device and pull the mains plug out of the socket before you mount or
remove components and clean the device.
❐
Do not leave the device unattended when it is connected to the power supply.
❐
The unit may not be moved or transported when activated.
❐
Never allow the device to operate continuously for more than 1 minute. After this time,
give it a break of 1 to 2 minutes.
❐
Inspect the device directly each time before using it. Do not use it if it is damaged. In the
event of damage, contact customer service.
1. Place the motor unit (10) on a dry, level surface close to a socket that is out of the reach
of children.
2. Make sure that the funnel tube (3) and coffee compartment (7) are free of debris, clean and
that the top grinding disc (2) is properly mounted (see chapter “Cleaning”).
3. Place the lid (6) on the coffee compartment and insert it in the device. The coffee compart-
ment must audibly lock into place.
4. Take the lid (1) off of the funnel tube, add a suf
fi
cient quantity of coffee beans to the funnel
tube. The required quantity depends on the coffee type and your personal taste. First try
starting with one measuring spoon of coffee beans per cup and, if necessary, change the
dose later.
5. Then close the lid again.
6. Set the coarseness with the adjustment wheel (11). We recommend the following as ap-
proximate values:
– 1 - 3
fi
ne coarseness for espresso machines
– 4 - 6 medium coarseness for
fi
lter coffee makers
