Error! Use the Home tab to apply Kop 1 to the text that you want to appear here.
User manual for SECC Neoflux® auto-cleaning Cleanflow magnet
30
Magnet bar tubes
The magnet bar tubes have s very small wall thickness. This creates a great Fe separation result.
Heavy parts (Fe or product) however, may hit the bar in a way that bumps occur, as this will block the
movement of the magnet bar.
Make sure that no heavy parts in your product flow can damage the magnet bar tubes!
We advise to place a (mechanical) sieve (filter) in front of the SECC.
Damage, caused by damaged magnet bar tube(s), cannot be claimed by warranty.
When a bar is damaged it has to be replaced by another (spare) one immediately to prevent
further damage to the bar and or cleanflow. The damaged bar can be sent to
Goudsmit
Magnetic Systems
for repair/revision.
Exchange / revise magnet bars
•
Magnet bar dismounting
: take away the protection plate at the head side of the device. Then
dismount the aluminium end flange of the magnet bar. After that the pneumatic coupling at the other
side of the housing needs to be dismounted. At last, after taking away the side screen, grab the bar
and pull it out at one of the 3 thicker SS bushes of the bar.
•
! Do not dismount the magnet bar itself magnetic danger!
•
“Hutmanchet” dismounting:
the Hutmanchets are screwed against the middle plates of the
housing. The can be screwed loose via the screen opening after having dismounted the magnet
bars.
Drawing:
SECC magnet bar
and “hutmanchet” dismounting
Cleaning & ATEX
To prevent explosion risk, avoid dust clouds and the build-up of dust layers.
If dust particles or layers heat up they may ignite and burn. This in turn can ignite airborne dust cloud
cause an explosion.
1. Dismount protection
plate
2. Dismount alu
end flange
3. Pull out magnet bar
4. Screw loose the
„hutmanchets“ if
necessary and take
them out via the
screen opening
Take off screen
Dismount pneumatic
coupling
Replace the
“hutmanchets” via the
screen opening
