Start-up
21
Start-up
Checks before and during start-up
During start-up, it is essential to follow the safety notes in this user manual!
Before start-up, make sure that:
The device or the installation has no damages or malfunctions.
•
All connections (electrical, mechanical, pneumatically) have been made properly.
•
The device or the installation is placed and located correctly.
•
All protective covers (if applied) have been fitted correctly.
•
All foreign (iron) objects larger than 10mm are blocked from entering the production channel.
•
The device is thoroughly cleaned, internally and externally.
•
The product does not fall into the magnet device, from a greater height than 10 meters.
•
That the entire installation, including the magnet tubes, is grounded.
•
There are no other sources of danger.
•
During operation, make sure that:
•
The device or the installation has no damages or malfunctions.
•
The motor is running correctly (no overload, no speed fluctuation, no loud noises, etc.).
•
The motor rotates in the correct/wanted direction.
