Device description
16
Magnetic bar housings remarks
•
The cleanflow has fragile magnetic bar housings. The housings have a very small wall thickness,
which ensures maximum déferrisation.
Heavy contamination of the product flow can damage the housings.
•
Make sure that heavy or non-magnetic parts are filtered out of the product flow before it passes the
cleanflow magnet! Place a sieve in the product stream before it reaches the cleanflow!
•
During maintenance or cleaning be very careful with the magnetic bar housings.
Always place the magnet section with the ends down and the flange up, not on its side.
•
When the magnetic bars are damaged it may be difficult to move the bars in their housings; If this
occurs it is advised to replace the tubes or let the tubes be replaced by Goudsmit, to avoid further
damage.
•
Damage to the magnet bar tubes and damage caused by damaged magnet bar tubes is not covered
by the guarantee. Please take the utmost care when cleaning the device!