Safety
11
Danger of high voltage
When installing and electrically connecting the device, make sure the activities are performed by qualified
personnel.
Switch off the electrical power supply before performing activities to the device!
Danger – Risk of an electric shock!
Always use the main power switch (on the control box) to switch off the installation in the event of a
dangerous situation.
Do not restore power until the dangerous situation has been resolved!
Danger of dust explosion
If this device is made according to an EX dust category (1D/2D/3D, acc. to ATEX equipment directive
2014/34/EU) it can accordingly be used in a dust zone (20/21/22, acc. to ATEX workplace Directive
99/92/EC). The Ex category is then described on the identification plate.
Make sure that the device complies to the correct explosion category
.
Danger – dust explosion!
(no sticker on device)
Also check if
the identification plates of mounted parts
show the correct Ex-category for the Ex
zone in which the device will be used.
!
!
