Goudsmit HGM09S, Operating Instructions Manual, Page: 53 / 75

Gaussmeter HGM09s Operating Instructions
Chapter 7 Serial Interface
Page 53 / 75
7.6
7.6 7.6
7.6 Explanation
Explanation Explanation
Explanation of the Individual SCPI
of the Individual SCPI of the Individual SCPI
of the Individual SCPI Commands
Commands Commands
Commands
7.6.1 7.6.1 7.6.1 7.6.1 Control Commands Control Commands Control Commands Control Commands
7.6.1.1 7.6.1.1 7.6.1.1 7.6.1.1 *CLS *CLS *CLS *CLS
Description: Resets the status register.
Mode: Command
Parameter: None
*RST
value: Not relevant
Example: send *CLS<LF>
7.6.1.2 7.6.1.2 7.6.1.2 7.6.1.2 *ESE[?] *ESE[?] *ESE[?] *ESE[?]
Description: Reads out the event register. The gaussmeter displays a decimal
value that corresponds to the sum of the binary place values of all
set bits in this register.
Mode: Command and query
Parameter: {<value>} (within the range 0..255)
*RST
value: Not relevant
Example:
send *ESE 22<LF>
send *ESE?<LF> receive 22<CR><LF>
7.6.1.3
7.6.1.3 7.6.1.3
7.6.1.3 *ESR[?]
*ESR[?] *ESR[?]
*ESR[?]
Description: Reads out and resets the standard event register. The gaussmeter
displays a decimal value that corresponds to the sum of the binary
place values of all set bits in this register.
Mode: Command and query
Parameter: {<value>} (in the range 0..255)
*RST
value: Not relevant
Example:
send *ESR?<LF>
receive 160<CR><LF>