Gaussmeter HGM09s Operating Instructions
Chapter 7 Serial Interface
Page 52 / 75
:PEAK?
Interrogate the current peak value mode.
:PEAK:MODE {OFF|SLOW|FAST}
Select the peak value mode.
:PEAK:NULL
Reset the current peak values.
:PEAK:READ?
Display the stored peak value.
:PEAK:READ:MIN?
Display the stored minimum peak value.
:PEAK:READ:MAX?
Display the stored maximum peak value.
7.5.4
7.5.4
7.5.4
7.5.4
Probe Functions
Probe Functions
Probe Functions
Probe Functions
:PROB:NAME?
Interrogate the probe designation.
:PROB:SN?
Interrogate the probe serial number.
:PROB:TYPE?
Interrogate the probe type.
7.5.5
7.5.5
7.5.5
7.5.5
Parameters
Parameters
Parameters
Parameters
:PAR:USB[?]
Select the operating mode of the
USB interface.
:PAR:UNIT[?]
Select the magnetic unit.
:PAR:PEAK[?]
Select the peak value recording mode.
:PAR:ACDC[?]
Select the DC or AC field measurement.
:PAR:RANGe[?]
Switch on/off the automatic range selection.
:PAR:POLDetect[?]
Switch on/off the north/south pole display.
:PAR:POFF[?]
Set the automatic turn off time.
:PAR:CHARing[?]
Switch on/off the battery charging.
:PAR:LIGHt[?]
Set the brightness of the display illumination.
:PAR:CONTrast[?]
Set the display contrast.
:PAR:SAVE
Store the set parameters.
7.5.6
7.5.6
7.5.6
7.5.6
Device Functions
Device Functions
Device Functions
Device Functions
:SN:UNIT?
Readout the device serial number.
:SN:SW?
Readout the software version.
:SN:HW
Readout the hardware version.
:SN:CALI
Readout the calibration information.