Gaussmeter HGM09s Operating Instructions
Chapter 5 Operation
Page 26 / 75
5.7
5.7
5.7
5.7
Measuring
Measuring
Measuring
Measuring Unit
Unit
Unit
Unit
You select the requested measuring unit by pressing the RANGE
RANGE
RANGE
RANGE button.
The function of the RANGE
RANGE
RANGE
RANGE button depends on the setting of the setup
menu under
Units.
The measurement is carried out either in the unit Tesla, Gauss, kA/m or
in Oersted. The display shows the selected measuring unit. The respec-
tive range limit value changes according to the selected measuring unit.
This is shown in the bottom left display area.
Also see the measuring ranges overview.
Operation via the external interface:
:UNIT {TESL|APM|GAUS|OE}
5.8
5.8
5.8
5.8
DC/AC Field Measurements
DC/AC Field Measurements
DC/AC Field Measurements
DC/AC Field Measurements
With the gaussmeter you can carry out both DC field measurements
(typical for permanent magnets) and AC field measurements (typical for
transformers and similar components). You can moreover record fast
single impulses.
Select the measuring mode via RANGE
RANGE
RANGE
RANGE or via the corresponding entry in
the setup menu.
Operation via the external interface:
:MODE {DC|AC}