manualshive.com logo in svg

Gotharman Little deFormer, Quick Manual, Page: 41 / 66

Share
Download
Gotharman Little deFormer Quick Manual Download Page 41

Double Granulator

Sens – 

0 to 255. Pitch tracking sense. At lower settings it will find more pitch tracking points,

which will make the pitch higher on complex sounds, while at higher settings it will find less
pitchtracking points.

Time – 

0 to 255. The time the granulator will sample the input, until it starts over again.

Size – 

0 to 255. The size of one grain.

Stp1 – 

1 to 16. Adjusts how many steps the granular sequence should consist of.

Spr1 – 

0 to 255. Adjusts how big an area of the RAM buffer, track 1 should use for grain playback.

Fsz1 – 

1 to 128. Adjusts how many grains track 1 should play back in a row.

Ofs1 – 

0 to 127. Selects the location of the lowest possible grain track 1 will play back.

Lvl1 – 

0 to 255. Granulator track 1 volume.

Feed – 

0 to 255. Granulator Feedback.

Play – 

Granulator play mode:

Seq – 

The granulator sequencer is controlling the grain playback order.

Key – 

The grain playback order is controlled by the step buttons. The ”9-16” must be pushed so it is

flashing to activate this. In this mode, a grain plays to its end, before it shifts to the selected grain.

KeyI – 

Key Immediate.The grain playback order is controlled by the step buttons. The ”9-16” must

be pushed so it is flashing to activate this. In this mode, it immediately shifts to the selected grain.

KeyO – 

Key One-Shot.The grain playback order is controlled by the step buttons. The ”9-16” must

be pushed so it is flashing to activate this. In this mode, it also immediately shifts to the selected
grain, but only plays it back one time.

Frm1-16 – 

Granulator track 1 grain select for sequencer step 1-16. Only 8 steps can be adjusted at a

time. Push the ”9-16” button, to toggle between steps 1-8 and steps 9-16.

Pit1-16 – 

Granulator track 1 pitch for sequencer step 1-16. Only 8 steps can be adjusted at a time.

Push the ”9-16” button, to toggle between steps 1-8 and steps 9-16.

Lvl1-16 – 

Granulator track 1 level for sequencer step 1-16. Only 8 steps can be adjusted at a time.

Push the ”9-16” button, to toggle between steps 1-8 and steps 9-16.

Summary of Contents for Little deFormer



































































Reviews:

No comments