Delay 1
Grp –
0 to 15. Delay time group. This is a very coarse adjustment of the delay time.
Time –
0 to 255. Delay time.
Fine –
0 to 255. Delay time fine adjust.
Feed –
0 to 255. Delay feedback. At settings below 128, the feedback is decreasing. At setting 128
(middle position) the feedback is 1:1. Use this setting, if you want to use delay 1 as a loop recorder.
At settings above 128, the feedback is increasing, and might cause distortion.
Size –
0 to 255. A granular parameter. The more this is turned up, the less space of the delay box is
used, causing some echo’s to repeat, and others not to sound at all.
Xfad –
0 to 255. Crossfade. Makes the delay effect sound smoother, by crossfading the feedback
repeats into each other.
Mode –
Crossfade mode.
nrm –
Normal crossfade mode. The repeats crossfades into ech other.
duck –
Ducked croosfade mode. One repeat fades out, before the next fades in.
Dir –
Delay playback direction.
Fwd –
Forwards.
Bwd –
Backwards
Beam –
0 to 255. A granular parameter, that ”beams” some of the delay sound grains to another
place.
Deep –
0 to 63. Simulates a delay box, with adjustable depth.
Metr –
Off, On. Delay metronome on/off. Use this when you are using the delay as looprecorder.
Tics –
0 to 32. Number of metronome ticks per delay time run.
Level –
0 to 255. Metronome volume.
Delay TAP page –
Use the ”Freeze” button to tap the delay time, when you are on this page. The
delay time parameters are automaticly adjusted to fit the tap time, so you can always go to the time
page, and fine adjust.
TAP! PUSH
<freeze>