Resistance Measurement „Ω“
1.
Disconnect supply power from the electrical circuit of the device to be measured, and discharge all high-voltage capacitors
2.
Make sure that the device under test is voltage-free. Interference voltages distort measurement results!
3.
Set the rotary switch to „Ω“.
4.
Connect the DUT as shown
Continuity Test
1.
Disconnect supply power from the electrical circuit of the device to be measured, and discharge all high-voltage capacitors
2.
Make sure that the device under test is voltage-free. Interference voltages distort measurement results!
3.
Set the rotary switch to the speaker sign (as shown as in the picture)
4.
Connect the conductor path under test as shown
Diode Testing with a Constant Current of 1 mA
1.
Disconnect supply power from the electrical circuit of the device to be measured, and discharge all high-voltage capacitors
2.
Make sure that the device under test is voltage-free. Interference voltages distort measurement results!
3.
Set the rotary switch to ->I
4.
Press the FUNC| ENTER key
5.
Connect the DUT as shown
6
