Alternating Voltage and Frequency Measurement V AC and Hz with Selectable Low-Pass Filter
1.
In accordance with the voltage or frequency to be measured, turn the rotary switch to V~ or Hz.
2.
Connect the measurement cables as shown. The “
⊥
” connector jack should be grounded
Voltage measurement:
1.
You can switch back and forth between voltage measurement with and without low-pass filter
2.
Press the FUNC | ENTER multifunction key repeatedly until unit of measure V or V/Fil appears at the display
Frequency Measurement:
1.
Apply the measured quantity is the same way as for voltage measurement
2.
Manually select the measuring range for the voltage amplitude. When the instrument is switched to frequency measurement, the
previously selected voltage measuring range remains active
3.
You can switch back and forth between frequency measurement with and without low-pass filter. Press the FUNC | ENTER
multifunction key repeatedly until unit of measure Hz or Hz/Fil appears at the display.
Connection of the measurement cables
5
